Konmison CNC Spindle Motor Kits Milling Spindle Motor 80MM 2.2KW + 13pcs ER20 Collet + 80MM Clamp Mount + Inverter + 5M Water Pipe + Water Pump
Huge Savings Item! Free Shipping Included! Save 14% on the Konmison CNC Spindle Motor Kits Milling Spindle Motor 80MM 2.2KW + 13pcs ER20 Collet + 80MM Clamp Mount + Inverter + 5M Water Pipe + Water Pump by Konmison at Touch and Know USA. MPN: 200120. Hurry! Limited time offer. Offer valid only while supplies last. 1.Spindle Motor: Size: 80mm Power: 2200W Voltage: 220V Frequency: 0-400Hz Speed: 0-24000rpm Water Cooling ER11 collet Runout off: less than 0.001mm
Water Cooling ER11 collet
Runout off: less than 0.001mm
Germany SKS 4pcs bearing
Bearing type: 2 x 7005C P4 DT & 2 x 7002C P4 DT
Power Interface: Optional GX16 waterproof air plug, there are marked 1234, 123 were connected to the inverter power supply (U, V, W), 4 connected inverter ground
Output: 0-220VAC 3-phase
3.ER20 Collet Set:
Gripping Range: 1MM to 13MM (1mm, 2mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12.7mm, 13mm)
Run-out tolerance 0.01mm (0.0006")
Structure: Single-stage Pump
Pressure: High Pressure
5.5M Water Pipes:
Can be connected between Water Pump and Spindle Motor
6.Spindle Motor Clamp Mount:
Material: Aluminum,Surface sandblasted
Application: Wood working industry rourter, such as wood door milling engraving and cutting, furniture producing
1 x 2.2KW Spindle Motor
1 x 2.2KW VFD
1 x 75W Water Pump
1 x 5M Water Pipes
1 x 80mm Spindle Clamp (Free 3pcs screws)
13 x ER20 Collet (1mm, 2mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12.7mm, 13mm)
How to connect:
The package come with two Aviation plugs, just put the little one into the spindle, then use the large one to fix into the little one, you will see the marked number (184.108.40.206) on the top of large one, Pin 1 goes to terminal U on the vfd. Pin 2 goes to terminal V on the vfd. Pin 3 goes to terminal W on the vfd. Pin 4 is a ground/common.
Features & Highlights
- 80MM 2.2KW Water Cooled Spindle Motor, Voltage: 220V, Run out off: less than 0.001mm, Speed: 0-24000rpm.
- The spindle motor applied to Lathes, Mills, Car Hoists, Pumps & Conveyors, etc.
- Main Application: Engrave for wood, bamboo, normal PCB, PVC, PMMA, plastic, duotone board (ABS) and etc nonmetal, also can engrave on gold, silver, copper, aluminium, Pb etc soft metal surface working, but not milling working
- Package include: 2.2KW Spindle Motor*1, 2.2KW VFD*1, 75W Water Pump*1, 5M Water Pipes*1, 80mm Spindle Clamp (Free 3pcs screws)*1, ER20 Collet*13.
|Package Weight:||22.55 pounds|
|Package Size:||16.4 x 9.2 x 9.2 inches|