Mophorn Dividing Head BS-0 5Inch 3 Jaw Chuck Dividing Head Set Precision Semi Universal Dividing Head for Milling Machine Rotary Table Tailstock Milling Set (5 Inch Chuck)
Free Shipping Included! Mophorn Dividing Head BS-0 5Inch 3 Jaw Chuck Dividing Head Set Precision Semi Universal Dividing Head for Milling Machine Rotary Table Tailstock Milling Set (5 Inch Chuck) by Mophorn at Touch and Know USA. MPN: Dividing Head. Hurry! Limited time offer. Offer valid only while supplies last. BS-0 Precision Dividing Head 5'' 3 Jaw Chuck Tailstock Dividing Plate CNC Milling Introduction : This is our semi-universal dividing head,one of
BS-0 Precision Dividing Head 5" 3 Jaw Chuck Tailstock Dividing Plate CNC Milling
This is our semi-universal dividing head,one of machine tool accessories for dividing workpieces into equal partitions. By using dividing scale ring, vernier, locating pin, index plate and change gear, workpieces placed can be divided into equal partitions according to your demand. It can be used for direct and indirect dividing. Able to complete gear, face and flute processing without need of accessories, however its whole construction is the same with the universal type.
Center Height: 3-15/16"
Headstock Taper: 7 B&S
Number of holes:
Worm gear reduction ratio: 1:40
Hole Through Spindle: 0.709"
Threads on back plate: 1-1/2" - 8
Spindle Bore (Clear Through): .708"
Spindle Mount: 1-1/2" x 8 TPI
Spindle Taper Runout: .0006"
-Head stock swivels to all angles
-All number from 1-50
-All even numbers from 50-100
-Many others from 50-400
-Spindles with tapered roller bearings are on integral part of all diving heads
-Can be easily Adjusted to any angle between +10 to 90 degrees from a horizontal position
Features & Highlights
- Model#: BS0 Dividing Head;Swing: 7-7/8" ; Center Height: 3.937" ; Support 5'' chucks.
- Gear has 1:40 ratio;Direct index plate of 24 holes allow direct dividing in 2,3,4,6,8,12 & 24.
- Accurate precision, little backlash, fine appearance and strong structure so can assure smooth rotation.
- The swivel head can be locked of any angle from 10˚ below horizontal to 90˚ vertical-precision fitting to base assures smooth rotation.
- This 5 inch Universal dividing head is installed on the milling machine for machine tool accessories will be arbitrarily divided into equal portions of the workpiece.
|Color:||5 Inch Chuck|
|Part Number:||Dividing Head|
|Item Weight:||49 pounds|
|Package Weight:||49.65 pounds|
|Package Size:||9.49 x 9.02 x 9.02 inches|